Which Led's
| Symptom
| Possible Cause(s)
| Possible Cure
|
| Power LED | Not blinking No picture
or sound
| Set is off or Possible bad
power supply or micron board | Unplug for 5 min. Plug back in.
Still not working? Requires Service.
Call Authorized Service Center
|
Power LED |
2 blinksNo picture or sound
|
Temperature problem | Make sure fan exhaust is not blocked.
Check for dust build up. Still not working?
Requires Service. Call Authorized
Service Center
|
Power LED |
3 blinksNo picture or sound
|
Lamp cover or door not secure
| Make sure lamp door is secure.
Still not working? Requires Service.
Call Authorized Service Center
|
Power LED |
4 blinks No picture or sound
| Fans have lost power.
Suspect AGU or A board depending
on model. This could also be
temperature related. | Make sure fan exhaust is not blocked.
Check for dust build up. Still not working?
Requires Service. Call
Authorized Service Center
|
| Power LED | 5 blinks No picture or sound
| Lamp driver (ballast) may be bad.
| Replace the lamp. |
| Power LED | 6 blinks No picture or sound
| Over voltage protection occured.
| Requires Service.
Call Authorized Service Center
|
| Power LED | 7 blinks No picture or sound
| Audio problems. | Requires Service.
Call Authorized Service Center
|
| Power LED | 8 blinks No picture or sound
| G3 ,A or B board may have
failed due to over voltage.
| Requires Service.
Call Authorized Service Center
|
| Power LED | 10 blinks No picture or sound
| Overvoltage | Requires Service.
Call Authorized Service Center
|
| Lamp LED | Light is on or flashing
No picture or sound
| Lamp is bad
| Replace the lamp. |
