Which LED'S
| Symptom
| Possible Cause(s)
| Possible Cure
|
Power LED | Light is Off | Lamp did not light or
lamp is broken.
| Unplug for 5 min. Plug set back in.
Still not Working?
Replace the lamp.
|
Light is Red
| Normal - set in
standby
mode. | |
Light is Green
| Set is on.
| |
Light is Orange
(blinking) | Preparing for operation. | Wait |
Lamp LED
| Light is Orange | Lamp is reaching
end of life.
| Order replacement lamp?
|
Light is Red
(blinking) | Set is not on. | Problem with lamp or lamp driver circuit.
Lamp or lamp ballast board may be bad.
Call Authorized Service Center for service.
|
Light is Green
(blinking)
| Set is not on. | Lamp door cover is not closed properly.
Make sure the door is secured properly.
|
|
Temperature LED | Light is Orange | Set is on.
| Heat is building up inside set.
Make sure fan exhaust is not blocked.
Check for dust build up.
|
|
| Light is Red | Set has shut down
due to overheating.
| Make sure fan exhaust is not blocked.
Check for dust build up.
|
|
|
|
|
|
Light is Red
(blinking) | Fans have stopped | Fan or power module may be bad.
Call Auth Service Center for service. |
We Hope You Found This Chart Helpful.
|
