Which LED'S
| Symptom
| Possible Cause(s)
| Possible Solutions
|
Power and
Lamp LED
| Both lights on, but no
picture or sound
| Suspect lamp failure
| Check and Replace Lamp
|
Power and
Lamp LED
| Both lights blink at .1
second intervals
| Ballast power supply may
be defective or...
| Internal Component Failure call
an Auth JVC Service Center
|
Also no picture or sound
| Lamp may not be closed
properly
| Make sure lamp door is closed or
latched properly
|
Power and
Lamp LED | Neither light comes on
or blinks.
Set will not come on with
remote
or powerbutton
| Possible bad power supply
or micron board
| Unplug for 5 minutes. Plug back in.
Still not working? Call Auth. JVC
Service Center for Repairs
|
Power and
Lamp LED | Power Light Off.
Lamp light blinks at
.5 sec intervals.
Also no picture or sound
| Communication error between
main drive board and receiver board
Main drive board and/ or receiver board
may be bad
| Unplug for 5 minutes. Plug back in
Still not working? Call an Auth.
JVC Service Center for Repair
|
Power and
Lamp LED | Both lights alternately blink
at .5 sec intervals.
Also no picture or sound
| Inner cabinet temp maybe too high.
Fan or fans may have quit.
Possible power supply failure.
Power or micron board may
need replacing. | Make sure fan exhaust is not blocked.
Check for dust build up.
Unplug for 5 min.
Plug back in. Still not working?
Call Authorized Service Center for Repair |
We Hope You Found This Chart Helpful.
|
